Suite 33-01, 33rd Floor, Menara Keck Seng,
203, Jalan Bukit Bintang,
55100 Kuala Lumpur,
Malaysia.
Previous | 62 / 112 | Next |
¡¾DIRECTIONS FOR USE¡¿
Allow the test, specimen, buffer and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test Dipstick from the sealed pouch and use it within one hour.
2. Place the test cards on a clean and level desk, then peel off the strip label of the test cards, stick the test dipstick onto it as soon as possible before testing.
For Serum or Plasma specimen:
· Hold the dropper vertically and transfer 3 drops of serum or plasma (approximately 75 μl) to the specimen area of test Dipstick and start the timer. See illustration below.
For Venipuncture Whole Bloodspecimen:
· Hold the dropper vertically and transfer 3 drops of whole blood (approximately 75 μl) to the specimen area, then add 1 drop of buffer (approximately 40 mL), and start the timer. See illustration below.
For Fingerstick Whole Bloodspecimen:
· To use a capillary tube: Fill the capillary tube and transfer approximately 75 μl of fingerstick whole blood specimen to the specimen area of test Dipstick, then add 1 drop of buffer (approximately 40 μl) and start the timer. See illustration below.
·To use hanging drops: Allow 3 hanging drops of fingerstick whole blood specimen (approximately 75 μl) to fall into the specimen area of test Dipstick, then add 1 drop of buffer (approximately 40 μl) and start the timer. See illustration below.
3. Wait for the colored line(s) to appear. Read results at 15 minutes. Do not interpret the result after 20 minutes.
Cat. No. |
Product Description |
Specimen |
Format |
Kit Size |
Cut-Off |
Status |
IHBSB-402 |
HBsAb Rapid Test Cassette |
WB/S/P |
Cassette |
40 T |
See Insert |
Non-CE |