C1-B-08, Blok Cemara 1, Jalan Bukit Segar Jaya,
Taman Bukit Segar Jaya,
43200 Cheras,
Selangor, Malaysia.
+6018-789 7171
+603-2116 5890
+603-2116 5890
+603-2116 5999
- Cardiac Marker Rapid Test
- Drug of Abuse Rapid Test
- ELISA
- Forsure Blood Grouping
- Infectious Disease Rapid Test
- Lab Consumable Item
- Latex Kits
- Oncology Rapid Test
- Others Rapid Test
- Urine Analyzer
- Veterinary Rapid Test Kit
- Women Health Rapid Test
Setia Scientific Solution
C1-B-08, Blok Cemara 1, Jalan Bukit Segar Jaya,
Taman Bukit Segar Jaya,
43200 Cheras,
Selangor, Malaysia.
C1-B-08, Blok Cemara 1, Jalan Bukit Segar Jaya,
Taman Bukit Segar Jaya,
43200 Cheras,
Selangor, Malaysia.
AB-PINACA (ABP) Rapid Test - Urine
| Previous | 149 / 158 | Next |
¡¾SUMMARY¡¿
AB-PINACA is a compound that was first identified as a component of synthetic cannabis products in Japan in 2012. It was originally developed by Pfizer in 2009 as an analgesic medication.2 AB-PINACA acts as a potent agonist for the CB1 receptor (Ki = 2.87 nM, EC50 = 1.2 nM) and CB2 receptor (Ki = 0.88 nM, EC50 = 2.5 nM) and fully substitutes for Δ9-THC in rat discrimination studies, while being 1.5x more potent.
¡¾DIRECTIONS FOR CASSETTE USE¡¿
Allow the test, urine specimen, and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 120μL) to the specimen well (S) of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.
3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10minutes.
Allow the test, urine specimen, and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it within one hour.
2. Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 120μL) to the specimen well (S) of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.
3. Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10minutes.
_Rapid_Test___Urine.jpg)
¡¾DIRECTIONS FOR PANEL USE¡¿
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test panel from the sealed pouch and use it within one hour.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the strip to at least the level of the wavy lines, but not above the arrow on the test panel.
4. Replace the cap and place the test panel on a non-absorbent flat surface.
5. Start the timer and wait for the colored line(s) to appear.
6. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test panel from the sealed pouch and use it within one hour.
2. Remove the cap.
3. With the arrow pointing toward the urine specimen, immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds. Immerse the strip to at least the level of the wavy lines, but not above the arrow on the test panel.
4. Replace the cap and place the test panel on a non-absorbent flat surface.
5. Start the timer and wait for the colored line(s) to appear.
6. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
_Rapid_Test___Urine1.jpg)
¡¾DIRECTIONS FOR DIPSTICK USE¡¿
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test dipstick from the sealed pouch and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the test dipstick vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the Test Dipstick when immersing the strip. See the illustration below.
3. Place the test dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.
Allow the test, urine specimen, and/or controls to reach room temperature (15-30ºC) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test dipstick from the sealed pouch and use it within one hour.
2. With arrows pointing toward the urine specimen, immerse the test dipstick vertically in the urine specimen for at least 10-15 seconds. Do not pass the maximum line (MAX) on the Test Dipstick when immersing the strip. See the illustration below.
3. Place the test dipstick on a non-absorbent flat surface, start the timer and wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.
_Rapid_Test___Urine2.jpg)
|
Cat. No. |
Product Description |
Specimen |
Format |
Kit Size |
Cut-Off |
Status |
|
DABP-102 |
AB-PINACA (ABP) Rapid Test Cassette |
Urine |
Cassette |
40 T |
10 ng/mL* |
CE |
|
DABP-114 |
AB-PINACA (ABP) Rapid Test Panel |
Urine |
Panel |
40 T |
CE |
|
|
DABP-101 |
AB-PINACA (ABP) Rapid Test Dipstick |
Urine |
Dipstick |
50 T |
CE |