Two-thirds of all adults drink alcohol. The blood alcohol concentration at which a person becomes impaired is variable dependent upon the individual. Each individual has specific parameters that affect the level of impairment such as size, weight, eating habits and alcohol tolerance. Inappropriate consumption of alcohol can be a contributing factor to many accidents, injuries, and medical conditions.

 

 

【INSTRUCTIONS FOR USE】

Wait 15 minutes after last alcohol intake or drink a glass of water before testing.

1. Bring the pouch to room temperature (15-30 °C or 59-86 °F) before opening. Remove the Test from the sealed pouch. Do not touch the Mouthpiece to avoid contamination.

2. Hold the middle of the Test. Firmly squeeze the Test to break the Inner Glass Tube. Perform the test as soon as possible to avoid the affects of humidity. Do not crush or bend the Test. Refer to the picture below.

 

3. Breathe into the Test.

· For Breath Alcohol Test without blow bag:

· Hold the middle of the Test horizontally. Take a deep breath. Blow hard into the Mouthpiece, in the same direction as the Test Arrows. Blow hard in one continuous breath for 12 seconds.

Note: Failure to blow hard, or in one continuous breath for 12 seconds, may cause false results. Do not inhale while blowing into the Test. Refer to the illustration below. Shake the Test slightly to distribute the crystals evenly in the Test Window.

 

· For Breath Alcohol Test with blow bag:

· Insert the Test into the Air Seal Neck of the blow bag in the same direction as the Test Arrows. Roll the Test into the blow bag until the Test Window is completely covered. Ensure the End of the Test is past the Air Seal Neck of the blow bag. Refer to the illustration below.

· Hold the middle of the Test horizontally. Take a deep breath. Blow hard into the Mouthpiece of the Test until the blow bag is completely inflated.

Note: Failure to blow hard, or to inflate the blow bag completely, may cause false results. Do not inhale while blowing into the Test.

· Remove the Test from the blow bag. Shake the Test slightly to distribute the crystals evenly in the Test Window.

 

4. Read results at 2 minutes by looking at the color of the majority of crystals. Do not read results after 5 minutes.