Opioid analgesics comprise a large group of substances which control pain by depressing the CNS. Large doses of morphine can produce higher tolerance levels, physiological dependency in users, and may lead to substance abuse. Morphine is excreted unmetabolized, and is also the major metabolic product of codeine and heroin. Morphine is detectable in the whole blood or serum or plasma for several days after an opiate dose1. The MOP Rapid Test Cassette is a rapid whole blood/serum/plasma screening test that can be performed without the use of an instrument. The test utilizes a monoclonal antibody to selectively detect elevated levels of Morphine in whole blood/serum/plasma. The MOP Rapid Test Cassette yields a positive result when Morphine in whole blood/serum/plasma reaches 40ng/ml.

 

【DIRECTIONS FOR USE】

Allow the test, specimen, buffer and/or controls to reach room temperature (15-30°C) prior to testing.

For serum or plasma specimen:

1. Bring the pouch to room temperature (15-30℃) before opening it. Remove the cassette from the sealed pouch and use it within one hour.

2. Place the cassette on a clean and level surface. Hold the dropper vertically and transfer 1 full drop of serum or plasma (approximately 40μl), then add 2 drops of buffer (approximately 80 μl) to the specimen well of the cassette, and then start the timer. Avoid trapping air bubbles in the specimen well. See illustration below.

3. Wait for the colored line(s) to appear. Read the result at 5 minutes. Do not interpret the result after 10 minutes.

 

 

1 Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it as soon as possible.

2 Place the cassette on a clean and level surface.

For Venipuncture Whole blood specimen:

Hold the dropper vertically and transfer 1 drop of whole blood (approximately 40μl) to the specimen well, then add 2 drops of buffer (approximately 80 μl), and start the timer. See illustration below.

For Fingerstick Whole blood specimen:

To use a capillary tube: Fill the capillary tube and transfer approximately 40μl of fingerstick Whole blood specimen to the specimen area of test cassette, then add 2 drops of buffer(approximately 80 μl) and start the timer. See illustration below.

3 Wait for the colored line(s) to appear. Read results at 5 minutes. Do not interpret the result after 10 minutes.

 

 

 

 

 

 

 

Cat. No.	Product Description	Specimen	Format	Kit Size	Cut-Off	Status
DMO-402	MOP Rapid Test Cassette	WB/S/P	Cassette	40 T	40 ng/mL	CE