Suite 33-01, 33rd Floor, Menara Keck Seng,
203, Jalan Bukit Bintang,
55100 Kuala Lumpur,
Malaysia.
Previous | 4 / 28 | Next |
ˇľDIRECTIONS FOR USEˇż
Allow the test, specimen, buffer and/or controls to reach room temperature (15-30°C) prior to testing.
1. Bring the pouch to room temperature before opening it. Remove the test cassette from the sealed pouch and use it as soon as possible.
2. Place the cassette on a clean and level surface.
For Serum or Plasma specimen:
· Hold the dropper vertically and transfer 1 drop of serum or plasma (approximately 25μL) to the specimen well then add 1 drop of buffer (approximately 40μL), and start the timer.
See illustration below.
For Venipuncture Whole Blood specimen:
· Hold the dropper vertically and transfer 2 drops of whole blood (approximately 50μL) to the specimen well, then add 1 drop of buffer (approximately 40μL), and start the timer. See illustration below.
For Fingerstick Whole Blood specimen:
· To use a capillary tube: Fill the capillary tube and transfer approximately 50μL of fingerstick whole blood specimen to the specimen area of test cassette, then add 1 drop of buffer (approximately 40μL) and start the timer. See illustration below.
· To use hanging drops: Allow 2 hanging drops of fingerstick whole blood specimen (approximately 50μL) to fall into the specimen area of test cassette, then add 1 drop of buffer (approximately 40μL) and start the timer. See illustration below.
3. Wait for the colored line(s) to appear. Read results at 10 minutes. Do not interpret the result after 20 minutes.
Cat. No. |
Product Description |
Specimen |
Format |
Kit Size |
Cut-Off |
Status |
OTS-402 |
TSH Rapid Test Cassette |
WB/S/P |
Cassette |
40 T |
5μIU/mL |
CE |